New Lower from Anvil Arms with Custom Engraving
I'm not sure I'm in any position to give pointers. We have lots of Class 3 knowledge available at the club, including having at least one active Class 3 dealer. I'm sure that someone will be along shortly if you need help. For what it is worth:
You need the Form 1 in duplicate, certification of citizenship, fingerprint cards (in duplicate I believe) and the check. The form has to be printed both front and back. The form has instructions printed on it, so if you follow them, you should be gtg.
I will tell you that sending forms to the BATFE will teach you patience.
You need the Form 1 in duplicate, certification of citizenship, fingerprint cards (in duplicate I believe) and the check. The form has to be printed both front and back. The form has instructions printed on it, so if you follow them, you should be gtg.
I will tell you that sending forms to the BATFE will teach you patience.
There is also a pic of a Pig enhanced 7.5" in one of S's pics.S Lance wrote:Sounds like a good start.
If you look at the video and pictures from the carbine drills I posted, Rob is shooting a 10.5", Steve has a 11.5", and I have a 12.5" so you can compare.
....................../´¯/)
....................,/¯../
.................../..../
............./´¯/'...'/´¯¯`·¸ F__ - Obama/Biden
........../'/.../..../......./¨¯\
........('(...´...´.... ¯~/'...')
.........\.................
....................,/¯../
.................../..../
............./´¯/'...'/´¯¯`·¸ F__ - Obama/Biden
........../'/.../..../......./¨¯\
........('(...´...´.... ¯~/'...')
.........\.................
If you are going to do two uppers, you might consider a REALLY short one like the 7.5" in the pictures. (I wonder which member that belongs to? It is a cute little thing isn't it.) You could then go with a standard M4forgery which would also accomidate a can if desired.
The biggest reason to go with a 12.5", and the reason I went with one, is that you can use a reflex type suppressor such as a Surefire 556AR or a AAC M4/SPR.
The biggest reason to go with a 12.5", and the reason I went with one, is that you can use a reflex type suppressor such as a Surefire 556AR or a AAC M4/SPR.
H0tR0d wrote:lol, my wife of all people said maybe i should build two uppers a m4orgery and a SBR MWHAHAH God now i know why I married her. I like the 12" uppers myself...but why pay 200 extra bucks for 4 less inches? right, lol...right?
-
- Member
- Posts: 55
- Joined: Sun Feb 01, 2009 9:56 am
- Location: Kentucky
oooooooh looks it's Ford with his new toy. I hate you lmao. I think you should build a 26" upper with a 6" flash suppressor. that would be kool right? make the barrel so big you need a stamp for it hehe.
"Beat your plowshares into swords and your pruning hooks into spears. Let the weak say, "I am strong." Joel 3:10
- H0tR0d
- Member
- Posts: 37
- Joined: Thu Jan 29, 2009 12:02 pm
- Location: Afghanistan for now, but home is Pike County, KY
hahah sup John, lol. S. I checked on the engraving and I think i'm going to have the front of the magwell done with the engraving. Or under the receiver at the trigger area. Roger that on the endplate and the castle nut. Quick question though, Do you have to have an endplate or if I were to buy a sling plate like the ASAP would it go in the place of the endplate? Also doing a search on the Reflex type suppressor. I'm not going to rush my decision but that kitty kat was really cute but if I got the 7.5" i'd also have to get the Adam arms piston system for the 7.5" to help out on the reliability
But anyways...
Thanks,
Chris
But anyways...
Thanks,
Chris
Who is online
Users browsing this forum: No registered users and 48 guests